GTI L4-2.0L Turbo (BPY) (2007)
-
Remove bolt - 1 - and pull universal joint - 2 - off steering gear.
-
Remove front wheels.
-
Loosen tie rod end nut, but do not remove yet.
CAUTION! To protect ball joint thread, screw nut on a few turns to pin.
-
Press off tie rod end from wheel bearing housing with ball joint puller 3287A and then remove nut.
-
Remove lower noise insulation.
-
Remove coupling rods from stabilizer bar.
-
Remove bolts - arrows -.