GTI L4-2.0L Turbo (BPY) (2007)
Rear Knuckle: Removal and Replacement
Wheel Bearing Housing, Removing and Installing
Wheel bearing housing, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench VAG 1332
Removing
-
Remove wheel.
-
Remove coil spring.
-
Remove wheel bearing/wheel hub unit.
-
Remove cover plate.
-
Remove ABS wheel speed sensor from wheel bearing housing.
-
Remove bolt - arrow -.
-
Remove bolt for tie rod - 1 -, upper transverse link - 2 - and lower transverse link - 3 from wheel bearing housing - 4 -.
-
Remove connecting link - arrow - from wheel bearing housing.