GTI L4-2.0L Turbo (BPY) (2007)
-
Install bolts - arrows - and tighten.
-
Install cover plate.
-
Install wheel bearing/wheel hub unit.
Only install bolted connections on wheel bearing housing if dimension "a" is reached!
-
Tighten bolt for tie rod - 1 -.
-
Tighten lower transverse link bolt - 3 -.
-
Tighten bolt - 1 - for upper transverse link.
Note: Washer - 2 - must be installed so that there is a gap - arrow B - between washer and cover plate - 3 -.
-
Tighten bolt - arrow -.