GTI L4-2.0L Turbo (BPY) (2007)
/Page-1270003.png)
Shake oil containers before opening.
-
Fill 5.5 liter DSG oil.
To change bottles, shut-off valve can be closed or Adapter For Oil Filling VAS 6262 can be held higher than transmission.
-
Move through VAS 5051 until DSG oil temperature is displayed.
-
Now start engine.
-
Press brake and shift into each selector lever position for approx. 3 seconds. Place lever in position P again.
Do not switch off engine!
With an oil temperature of 35° to 45° Celsius:
-
Disconnect quick-release coupling of Adapter For Oil Filling VAS 6262 with engine running.
-
Let excess oil drain.
-
As soon as oil has run out (it begins to drip), remove Adapter For Oil Filling VAS 6262 and install plug with new seal.
Tightening torque: 45 Nm
-
Turn off engine.
Drained oil must not be used to fill again.
Dispose of oil in an appropriate manner.
