GTI L4-2.0L Turbo (BPY) (2007)
Before handling Mechatronic, touch a grounded object again.
-
Carefully release connector of Transmission Input Speed (RPM) Sensor G182 with Clutch Oil Temperature Sensor G509 using a small
screwdriver - 1 - and at the same time carefully pry out connector using a second screwdriver - 2 -.
Be very careful. The connector locking mechanisms can break. If this happens, replace sensor.
Do not pull on wire!
-
Remove connector.
-
Remove wire from retaining tabs - arrows -.