GTI L4-2.0L Turbo (BPY) (2007)
/Page-1316008.png)
All 10 - bolts - must be replaced.
-
First install all - bolts - by hand.
-
Then diagonally tighten all 10 - bolts - to 5 Nm, finally rotate an additional 90° in same sequence. Begin with bolt - 1 -.
-
Install Transmission Input Speed (RPM) Sensor G182 and Clutch Oil Temperature Sensor G509 line first in clamp - arrow II -. Then in clamp -
arrow I -.
-
Press connector onto Mechatronic.
Small oil pump cover and large cover bolts must always be replaced.
