GTI L4-2.0L Turbo (BPY) (2007)
-
Now remove impact bolster - 1 - in front of clutch pedal - 2 -.
-
Remove clutch pedal - 1 - from mounting bracket - 3 -, to do so, remove nut - 2 - and pull out bolt - 5 -.
-
Swivel clutch pedal slightly toward front and remove over-center spring - 4 - from mounting bracket.
-
Release clutch pedal from master cylinder using pliers T10005.
-
Remove clutch pedal.
Installing
Installation is in reverse order of removal, note the following:
Note: Replace self-locking nut.
-
Install mount - 2 - on master cylinder operating rod - 1 -.
-
Press mount until it engages audibly in notch on clutch pedal.