GTI L4-2.0L Turbo (BPY) (2007)
Flywheel: Service and Repair
Flywheel, removing and installing
Special tools, testers and auxiliary items required
^
Flywheel Retainer 3067
Removing:
Note:
^
To prevent damage to dual-mass flywheel when removing, bolts - B - must not be removed using an air-powered or impact wrench. Only removing
bolts - B - by hand is permitted.
-
Rotate dual-mass flywheel - A - so that bolts - B - stand centered to holes - arrows -.
-
When removing bolts - B -, make sure that bolt head is not jammed on flywheel.
-
Insert Flywheel Retainer 3067 in hole on cylinder block.
-
Mark flywheel to engine.
-
Remove flywheel.