GTI L4-2.0L Turbo (BPY) (2007)
/Page-1357001.png)
Seals and Gaskets: Removal and Replacement
Input Shaft Seal, Replacing
Input shaft seal, replacing 02Q, 6 Speed M/T
Special tools, testers and auxiliary items required
^
Extractor lever T20143/1
^
Thrust piece T40008
^
Sealing grease G 052 128 A1
Work procedure
-
Remove transmission.
-
Remove slave cylinder with release bearing.
-
Pry out input shaft seal using extractor lever T20143/1.
Note: Do not damage the seal running surface on the input shaft.
