GTI L4-2.0L Turbo (BPY) (2007)
Installing
-
First insert noise insulation.
Noise insulation installation location:
The - arrow - is pointing in driving direction.
-
Then press frame into center console.
-
Then turn inner side of boot toward outside.
-
Install shift knob and boot and press together new clamp - arrow -.
When connecting, shift knob must engage in shift lever groove around circumference.
-
Then press boot into frame in center console.
Selector Mechanism, Removing and Installing
Selector mechanism, removing and installing
Removing
Special tools, testers and auxiliary items required
^
Torque wrench VAG 1331
^
Grease G 000 450 02