GTI L4-2.0L Turbo (CBFA) (2008)
Timing Cover: Service and Repair
Lower Timing Chain Cover
Lower Timing Chain Cover (GTI)
Special tools, testers and auxiliary items required
^
Engine Support Bridge 10-222A
^
Hook 10-222A/10
^
Shackle 10-222A/12
^
Locking Pin T10060 A
^
Bits T10099
^
Counter-Hold Tool T10355
^
Pressure Piece T10368
^
Torque Wrench V.A.G 1331
^
Torque Wrench V.A.G 1332
^
Frame 10-222A/13
^
Frame 10-222A/1
Removing
-
Remove noise insulation.
-
Remove front part of the right wheel housing liner.
-
Drain engine oil.
-
Remove bolts - arrows -.
-
Remove air guide pipe by lifting clamps - 1 and 2 -.
CAUTION!
Risk of destroying belt if running direction of a used ribbed belt is reversed. Before removing ribbed belt, marking running direction with
chalk or felt-tip pen for reinstallation.
-
Remove right air guide hose - arrows -.