GTI L4-2.0L Turbo (CBFA) (2008)
Vanity Lamp: Service and Repair
Illuminated Vanity Mirror Lamps
Special tools, testers and auxiliary items required
-
Trim removal wedge VAS 3409
NOTE:
-
When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim
removal wedge VAS 3409, screwdriver) will be positioned, using commercially available adhesive tape.
-
Removal and installation for both lamps is performed in the same way and is only described for one lamp.
Removing
-
Turn off the ignition and all electrical consumers.
-
Carefully pry lamp out of roof trim using trim removal wedge VAS 3409 or a screwdriver.
-
Disconnect electrical connection - arrow -.
Bulb, replacing
-
Push contact plate - 1 - of lamp in direction of arrow and remove soffit - 2 - from socket.
-
Replace the bulb (12 V, 5 W).
Installing
Install in reverse order of removal.