GTI L4-2.0L Turbo (CBFA) (2008)
-
Install wheel hub support T10149 with a wheel bolt to the wheel hub.
-
Lift wheel hub with wheel hub support T10149 and engine/transmission jack V.A.G 1383 A far enough until it is possible to access the bolts on
the right stabilizer bar clamp.
Procedure for both vehicles sides
-
Remove nut -arrow- and remove bolt toward rear.
-
Remove tie rod.
Installing
-
Install tie rod in vehicle and hand-tighten bolts.
Only bolt on tie rod if dimension "a" is reached!
-
Bolt tie rod -1- to subframe and tighten new nut -arrow-.