GTI L4-2.0L Turbo (CBFA) (2008)
1 - Nut
2 - Transmission shift lever
^
Can be replaced with the shift mechanism installed
^
Adjust shift mechanism after installation.
3 - Slide shoe
^
Clip into actuator lever
4 - Bushing
^
Not needed with plastic relay lever
5 - Relay lever
^
Adjust shift mechanism after installation.
6 - Shift unit
^
Consists of shift shaft and shift cover
^
The components cannot be separated from each other
^
Can be removed and installed with transmission installed
7 - Bushing
^
For selector shaft
8 - O-ring
^
Insert into surrounding groove of shift cover
^
Install coated with gear oil
^
Always replace
9 - Cap
^
For transmission breather
10 - Retaining washer
^
For relay lever
^
Not needed with the plastic relay lever
11 - Selector shaft seal