GTI V6-2.8L (AFP) (1999)
A/C Signal: Testing and Inspection
With Manufacturer's Scan Tool
Signal From/to A/C Compressor, Checking
Special tools and equipment
-
VAG1551 Scan Tool (ST) or VAG1552 mobile scan tool with VAG1551/3 adapter cable
-
VAG1598/31 test box
-
Multimeter (Fluke 83 or equivalent)
-
VW1594 adapter set
-
Wiring diagram
Test conditions
-
Fuses 5, 10 and 29 OK
-
Air conditioner functioning OK
-
Air conditioner switched off
-
No DTCs stored in DTC memory.
-
All electrical consumers (e.g. lights and window defroster) switched off
-
Battery (B+) voltage at least 11.5 V
-
Vehicle at room temperature (warmer than + 15 °C).
Test sequence
-
Connect VAG1551 (VAG1552) Scan Tool (ST).
-
Switch ignition on and press buttons -0- and - 1- to insert "Engine Electronics" address word 01 (when doing this engine must be running at idle).
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -8- to select "Read Measuring Value Block" function 08 and press -Q- button to confirm input.
Indicated on display
Read Measuring Value Block
Input display group number XXX
-
Press buttons -0-, -5- and -0- to input display group number 50 (050) and press -Q- button to confirm input.
Indicated on display: (1-4 = display fields)
Read Measuring Value Block 50
->
1
2
3
4
-
Check specified values for air conditioner (display fields 3 and 4).