GTI V6-2.8L (AFP) (1999)
-
Pull line/hose assembly -C- from master cylinder and seal.
-
Remove driver's side lower dash cover. Refer to Body and Frame.
Remove complete clutch pedal mounting bracket as follows:
-
Remove nuts (arrows -1-) for connecting plate -A- and remove plate.
-
Remove nuts (arrows -2-) for mounting bracket 3- and remove bracket.
Separate master cylinder operating rod from clutch pedal as follows:
-
Insert release tool 3309 in clutch pedal cut-out (arrow -A-). The inscription "top/open" (-B-) points away from clutch pedal.
-
With pliers 10-208A positioned in recesses (arrow -C-) press clamp together.
-
Turn stop -A- for clutch pedal in direction of arrow and remove.
-
Push slave cylinder in direction of arrow -1- onto stop.
Note:
-
Slave cylinder must not be covered in upper area by over-center spring mounting (arrow -2-).
-
Swing slave cylinder in direction of arrow -3- Out Of mounting bracket.