GTI V6-2.8L (AFP) (1999)
/Page-1273002.png)
-
Pull out seal.
Notes:
-
Do not damage sleeve, otherwise leaks Will occur.
-
Replace sleeve if damaged. Refer to Case, M/T.
Installing
-
Drive seal evenly into sleeve onto stop.
-
Fill space between sealing lips with MoS2 grease.
-
Insert axle shaft.
-
Install cone-head bolt into flange shaft threaded piece.
-
Install left-hand drive shaft or attach right-hand drive shaft to flange shaft.
-
If removed, install protective cover for right inner constant velocity joint.
-
Top up transmission oil.
