GTI V6-2.8L (BDF) (2002)
Subframe: Service and Repair
Threads In Longitudinal Member, Servicing
Threads in longitudinal member, servicing
It is possible to service the threads in the nuts welded in the longitudinal member depending on certain conditions.
^
Servicing work may only be carried out once per thread.
^
If servicing is necessary, the nuts must be replaced.
^
Observe the operating instructions of the VAS repair kit.
WARNING:
When drilling, it is essential to use eye protection!
^
Have your work checked by the foreman responsible or person next in charge.
^
Any damage caused to the underbody sealant layer should be repaired; Notes covering this can be found in booklet:
^
Only use the VAS repair kit listed in the table for servicing work
VAS thread repair kit