GTI V6-2.8L (BDF) (2002)
Brake Pedal Assy: Service and Repair
Brake Pedal Overview
Brake pedal - assembly overview
WARNING: The brake pedal travel must not be restricted by additional floor mats.
Note: Grease all mountings before installing with grease Part No. G 000 602.
1. Mounting bracket
2. Self-locking hex nut, 20 Nm (14.8 ft. lbs.)
3. Brake light switch for vehicles up to 02.00
-
Before installing new brake light switch, connect brake pedal to brake booster push rod
-
Before installing pull plunger out completely
-
Installing:
CAUTION! Keep brake pedal in the down position and hold pedal while installing switch.
-
Guide switch through mounting hole (only installs in one position) and secure by turning 90° clockwise
-
Release brake pedal
-
Connect brake light switch connector
-
Check function of brake lights
-
Brake light switch: adjusting
4. Brake light switch for vehicles from 03.00
-
Before installing new brake light switch, connect brake pedal to brake booster push rod
-
Before installing pull plunger out completely
-
Installing:
CAUTION! Keep brake pedal in the up position and hold pedal while installing switch.
-
Guide switch through mounting hole (only installs in one position) and secure by turning 45° clockwise
-
Release brake pedal