GTI V6-2.8L (BDF) (2002)
Hex nut, removing and installing
-
Tightening torque: 15 Nm (11 ft lb)
-
Remove hex nut while counter holding with 3213A or equivalent commercially available 2 hole pin wrench (with 4 mm pins).
Clutch Plate, Removing
A/C Clutch -N25- (Sanden), Removing And Installing
Clutch plate, removing
-
Carefully pry off clutch plate using two large screwdrivers -A-.
Use locally available 2 or three arm puller if plate is securely seated (difficult to remove).
Clutch Pulley, Removing
A/C Clutch -N25- (Sanden), Removing And Installing
Clutch pulley, removing