GTI V6-2.8L (BDF) (2002)
Fuel Filler Neck: Service and Repair
Fuel tank, fuel filler and attachments, removing and installing
1. Sealing cap
2. Seal
^
Replace if damaged
3. Securing bolt
4. Tank flap unit
^
With rubber cup
5. Breather line
^
Black
^
Check seated securely
^
Clipped onto top of fuel tank
6. Ground connection
^
Check seated securely
7. Breather line
8. Gravity valve
^
To remove valve unclip upward out of support
^
Check valve for through flow
^
Valve vertical: Open
^
Valve tilted 45°: Closed
9. Seal
^
Replace if damaged
10. Change-over valve
^
To remove valve unclip sideways out of socket
^
Before installing remove sealing cap item 1
^
Checking, Refer to Fig. 2
11. Breather line
12. Pressure retention valve
^
Checking, Refer to Fig. 3
13. Breather line
^
Black