GTI V6-2.8L (BDF) (2002)
-
Remove cover cap - 1 - and seatbelt guide - 2 -.
-
Remove belt webbing - 3 - from lower fitting.
-
Remove cover and cushion, seat cushion backrest.
-
Remove bolts - 1 - (qty. 4, 23 Nm) and remove belt mounting - 2 - from backrest frame - 3 -.
-
Remove hex nut - 5 - (40 Nm) and unhook automatic belt retractor - 4 - from backrest frame - 3 -.
-
Thread seatbelt with seatbelt strap downward out of backrest frame - 3 -.
NOTE: To unreel seatbelt, automatic belt retractor must be held in installation position.
Installing
-
Installation is reverse of removal.