GTI V6-2.8L (BDF) (2002)
2
-
Webbing loops on belt edge torn.
3
-
Burn marks from cigarettes or similar.
Inertia reel locking effect, checking
Inertia reel has two locking functions.
-
First locking function is initiated by belt being jerked out of reel (belt extraction acceleration).
Checking
-
Pull belt out of inertia reel with firm jerk.
-
No locking effect - replace seat belt complete with belt latch.
-
If difficulties are experienced when pulling belt out or reeling belt in, first check whether position of inertia reel has been altered.
-
Second locking function is initiated by change in vehicle movement sequence (vehicle-dependent locking function).
Checking
-
Fasten seat belt.
-
Accelerate vehicle to 20 km/h (13 mph) and then carry out emergency braking with foot brake.
-
Replace seat belt complete with belt latch if seat belt is not locked by locking mechanism during braking procedure.
WARNING!
For safety reasons, road test should performed in traffic-free area to ensure that other motorists/pedestrians etc. are not endangered.
Belt latch, visual check
-
Inspect belt latch for cracks and fracturing.