GTI V6-2.8L (BDF) (2002)
-
Remove lower hex bolt -2- after first removing the noise insulation.
-
Remove bolts -arrows- and remove middle cover of engine compartment noise insulation.
-
Remove hex nut, unclip securing clips -arrows- and remove left-hand engine compartment section of noise insulation.
-
Remove brackets/retainers for power steering pressure pipes/hoses and place to side.
-
Remove lower hex bolt -2- (M12 x 180 mm).
When installing tighten hex bolt to 65 Nm.
-
Take starter out downward.
Installing