GTI V6-2.8L (BDF) (2002)
-
Remove intake hose -1-, electrical connection -2- and hose -3- from Mass Air Flow (MAF) Sensor
-
Remove screws -4- and -5- and remove complete air filter assembly.
NOTE: Starter can be removed without prior removal of battery and battery mounting. For clarity, the following illustrations show the battery removed.
-
Remove bracket -arrow- from transmission.
-
Ensure transmission selector is in "Park" and lever shifter cable end -1- from shifter lever -4- using screwdriver.
-
Unclip shifter cable from holder -3- lift out shifter cable and set aside.
CAUTION!
-
Do not remove screw -2-.
-
Do not kink shifter cable