volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Power Steering Pump|Testing and Inspection|Page 5322 > < Power Steering Pump|Testing and Inspection|Page 5320
Page 4
background image

Gasoline engines: 85 to 95 bar (1233 - 1378 psi) 

Diesel engines: 96 to 105 bar (1392 - 1523 psi) 

Notes:  

^

If the reading is higher or lower than specified replace pump:

^

Removing and installing power steering pump, vehicles with low mounted power steering pump, Refer to Power Steering Pump, Service and
Repair.

^

If reservoir fluid level is low then check steering system for leaks.

^

For leaks at the pinion first check the lines/line connections for leaks and if necessary tighten and wipe dry.

^

If the pinion seal or the rack seals in steering transmission housing are leaking then replace steering transmission.

^

To check the rack seals loosen the hose clip on the boot and push boot to one side.

Vehicles with high mounted power steering pump 

-

Remove engine cover.

-

Clamp return hose with hose clamp 3094.

Power Steering Pump|Testing and Inspection|Page 5322 > < Power Steering Pump|Testing and Inspection|Page 5320