GTI V6-2.8L (BDF) (2002)
Control Arm Bushing: Service and Repair
Control arm bonded rubber bushing, replacing
Fig. 1 Pressing out front bushing for control arm
Use lubricant to press in the bonded rubber bushing e.g. lubricant G294 421 A1
Fig. 2 Pressing in front control arm bushing
Never use grease!
Fig. 3 Installation position of rear control arm mounting
One of the embossed arrows points toward the projection (arrow A) on the control arm.
The cam -1- must always point to the outside of the vehicle.