GTI V6-2.8L (BDF) (2002)
1. Supporting ring
-
4-piece, unclip from inner plate carrier
-
Inserting see Fig. 2
2. Inner plate carrier
-
Inserting see Fig. 4
-
Assembling see Fig. 2
3. Circlip
-
Different thicknesses
-
Mark after removing and insert in same position
4. Thrust plate
-
Smooth side faces inner plate
-
Insert together with inner plate carrier see Fig. 2
5. Inner plate
-
Installing see Fig. 2
6. Outer plate
-
Installing see Fig. 2
-
Always 1.5 mm thick
7. Outer plate
-
Always 2 mm thick
-
Installing see Fig. 2
8. Corrugated washer
9. Circlip
-
Removing and installing see Fig. 1
10. Piston cap
-
Sealing lips are vulcanized to cap