GTI V6-2.8L (BDF) (2002)
-
Turn piston slightly when installing
11. Clutch housing with turbine shaft
-
There are two different types
-
Height varies according to number of inner and outer plates
12. O-ring
-
Always replace
-
Installing see Fig. 4
13. Piston ring
-
Check that it is correctly located see Fig. 2
-
Installing see Fig. 3
Fig. 1 Removing and installing circlip (arrow)
-
Press down carefully on piston cap until circlip can be installed.
Fig. 2 Checking seating of piston rings
A piston ring is installed on the pump shaft inside the clutch housing (arrow).
-
Ensure that ends of piston rings are hooked together.
Fig. 3 Fitting and hooking ends of piston ring together