GTI V6-2.8L (BDF) (2002)
-
Remove left wheel.
-
Remove sound insulation tray.
-
Remove left-hand sound insulation.
-
Turn steering to left lock.
-
Disconnect drive shaft from flanged shaft.
-
Mark installation position of ball joint bolts on left-hand control arm and remove bolts.
-
Remove bolts (arrows).
-
Disconnect left connecting link -1- from control arm and turn link upward.
-
Swing wheel bearing housing outward.
-
Guide left drive shaft -2- out between subframe and transmission.
-
Lift drive shaft and secure to suspension strut with wire.
-
Remove flange shaft securing bolts by threading two bolts into flange and counterholding flange shaft using a lever.
-
Place drip tray under transmission.
-
Remove flanged shaft with spring.
-
Pull flange shaft oil seal out using VW 771 and VW 771/37.