GTI V6-2792cc 2.8L DOHC (AAA) (1996)
-
Twist stripped end of resistor wire with end of (gray/green) wire coming from harness, install butt-splice and crimp as shown.
-
Crimp remaining end of gray/green wire (from TCM connector end into other end of butt-splice as shown).
-
Re-tape wiring harness.
-
Reinstall TCM connector cover and install new tie-wrap.
-
Reinstall connector onto TCM.
-
Verify throttle angle setting using Function 08 display group 001-->(IMPORTANT! kickdown switch activation must be verified during throttle
angle setting).