GTI V6-2792cc 2.8L DOHC (AAA) (1996)
![background image](/volkswagen/gti/v6-2792cc_2.8l_dohc_(aaa)/Page-990005.png)
-
Install electrical connector of resistor wire Part No. ZVW 311 100 into this cavity (50).
-
Remove enough tape to expose 125 mm (approx. 5 in.) wire harness.
-
Locate gray/green wire in cavity 16 of TCM connector -arrow-.
-
Follow wire from cavity 16 back into harness approx. 100 mm (4 in.), cut wire at this location.
-
Strip insulation from both ends of wire.