GTI V6-2792cc 2.8L DOHC (AAA) (1996)
Evaluating display group 016
Checking voltage supply
Connector At Mass Air Flow Sensor
-
Disconnect 4-pin connector from Mass Air Flow (MAF) sensor.
-
Connect multimeter with test leads from VW 1594 to measure voltage at terminals 1 and 3.
Specification: 9.0-14.5 volts.
If no voltage is present:
-
Switch ignition off.
-
Check wiring according to wiring diagram.
Checking wiring
-
Switch ignition off.