GTI V6-2792cc 2.8L DOHC (AAA) (1996)
Steering Column Lock: Service and Repair
Steering column, assembly
WARNING: Special safety precautions and some different procedures apply to vehicles equipped with airbags
CAUTION: Before working on the electrical system:
Obtain radio anti-theft code.
Ignition OFF !
Disconnect battery Ground (GND) strap.
Note:
After reconnecting battery: Activate vehicle equipment such as radio, clock and power windows as per service procedures and/or Owner's
Manual.
On vehicles equipped with OBD II, activate readiness code. Refer to Powertrain Management, Computers and Control Systems, Testing
and Inspection, Procedures See: Powertrain Management/Computers and Control Systems/Testing and Inspection
For further information on the steering column assembly, refer to Steering and Suspension, Steering, Steering Column, Service and Repair See:
Service and Repair/Steering Column Tube & Steering Wheel, Servicing
1. -
Horn pad
-
Removing, Fig. 1
2. -
Horn plate
-
Removing, Fig. 2
3. -
50 ±10 Nm (37 ±7 ft lb)
4. -
Steering wheel
-
Horn contact ring, Fig. 3
-
Lubricate horn ring with universal grease
5. -
Steering column switch securing screws
6. -
Combination switch
-
Turn signal switch. -E2-
-
Headlight dimmer/flasher switch -E4-
-
Emergency flasher switch -E3-
-
Removing, Fig. 4
7. -
Windshield wiper/washer switch -E22-
-
Removing, Fig. 4
8. -
Upper steering column trim
9. -
Lower steering column trim
10. -
Steering column
11. -
Support ring
12. -
Steering lock housing securing bolt
-
Shear bolt
13. -
Steering lock housing
-
Removing and installing, refer to Steering and Suspension, Steering, Steering Column, Service and Repair See: Service and