GTI V6-2792cc 2.8L DOHC (AAA) (1996)
Fig. 6 - Wheel Bearing, Pressing Into Wheel Bearing Housing
Fig. 7 - Wheel Hub, Pressing Into Wheel Bearing
Replacement (Complete)
Front
NOTE:
-
From m.y. 1995 the suspension strut for vehicles with Plus suspension (6 cyl.) is also installed in vehicles with Base suspension (4 cyl.).
-
For this procedure, use the tools shown in the following illustrations or their equivalents.
-
Directly below the component legend are the Fig. numbers. Please refer to these for information regarding removal and installation instructions.
1
Shock absorber
-
Can be replaced individually
-
After replacing, check wheel alignment