GTI V6-2792cc 2.8L DOHC (AAA) (1996)
Fig. 1
Fig. 1 Driving spring pin (-arrow-) out and in
Driving out
- Drive spring pin for engaging lever and spring pin for detent segment out only far enough to remove selector shaft.
Note:
Spring pin of engaging lever may drop into planetary gearbox.
Driving in
- Drive in spring pins after inserting selector shaft, engaging lever and detent segment.
Fig. 2
Fig. 2 Removing and installing selector shaft with selector segments
- Remove bolt (-arrow-) and take out washer.
Note:
- The washer is placed into the groove of the selector shaft and secures the shaft to keep it from dropping out.
- The selector shaft can be removed or installed after taking out the spring for the selector segment
Fig. 3
Fig. 3 Installing guide plate and supporting plate