Jetta L4-1.9L DSL Turbo (AAZ) (1997)
Separating Point (11)
-
To allow replacement of the center muffler only instead of replacing the center/rear muffler as an assembly.
-
The marks appear 3 times on the circumference of the connecting pipe.
-
The production center and rear muffler are a one piece welded assembly. For repairs, the center and rear mufflers are supplied individually and a
repair connecting pipe with two clamps is supplied.
-
Cut through the connecting pipe with a body saw square to the separation point.
Separating Point (12)
-
To allow replacement of the rear muffler only instead of replacing the center/rear muffler as an assembly.
-
The marks appear 3 times on the circumference of the connecting pipe.
-
The production center and rear muffler are a one piece welded assembly. For repairs, the center and rear mufflers are supplied individually and a
repair connecting pipe with two clamps is supplied.
-
Cut through the connecting pipe with a body saw square to the separation point.
Dimension -b- (13)
-
Approx. 10 mm (0.40 inch).
Dimension -a- (14)
-
Approx. 5 mm. (0.20 inch).
Marking (15)
-
Three times on circumference.
Marking (16)
-
Three times on circumference.
-
S = Manual transmission
-
A = Automatic transmission
Connecting Pipe (17)
-
Repair piece for use when replacing a single muffler.