Jetta L4-1.9L DSL Turbo (AAZ) (1997)
Center Mounted Brake Lamp: Technical Service Bulletins
Center High-Mounted Brake Light - Replacing
Group: 68
Number: 97-O1
Date: Jan. 14,1997
File this Technical Bulletin in Repair Manual No: W42 011 294 114A
Subject:
Center High-mounted Brake Light, Replacing
Model(s):
Jetta
1993 -->
This Technical Bulletin supercedes Technical Bulletin, Group 68, No. 96-03, dated Oct. 30, 1996. The bulletin is filed in Repair Manual W42 011 294
114A
Center high-mounted brake light, replacing
Materials
^
Essex Betaseal U401 clear primer (Essex No. 435 18)
^
Essex Betaseal U402 black primer (Essex No. 435 20 A)
^
Essex Betaseal U400 HV urethane adhesive (Essex No. 57302 or 57302 M)
Note:
Contact Essex ARG at 1-800-453-3779 (ask for customer service) for distributors of these Essex products in your local area.
Tools
1 - Glass scraper (commercially available)
2 - Blade (commercially available)
Preparation for installing
-
Carefully remove residual polyurethane material from removed support (do not damage black ceramic paint) using scraper and blade.
-
Coat contact surface of glass with clear primer and wipe off immediately.
-
Coat contact surface of glass with black primer and let dry for 60 seconds.
-
Apply urethane adhesive to support, press and hold support in position for approx. 3 minutes.
-
Check installation position of both supports:
^
Parallel