Jetta L4-1.9L DSL Turbo (AAZ) (1997)
Radiator Cooling Fan Temperature Sensor / Switch: Service and Repair
Optional Third Speed Fan Thermo Switch
LEGEND
1
O-ring
2
Bolt
3
Hose
4
Retaining Clip
5
Engine Coolant Temperature Sensor (G62) Or Engine Temperature Sensor (G27) With Engine Coolant Temperature Sensor (G2)
6
Hose
7
Third Speed Coolant Fan Control (F165) Thermal Switch Only As An Option
8
Hose
9
Hose
10
Bracket
11
Coolant Pipe
12
Oil Cooler
13
Hose
14
Water Pump Mounting Bolt And Studs
15
Bracket
16
Nut
17
V-belt Ribbed Drive Belt
18
Engine Coolant Pump (Water Pump)
19
Hose
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.
COMPONENT NOTES
O-ring (1)
-
Always replace.
Bolt (2)
-
Tighten to: 10 Nm (7 ft. lbs.).
Hose (3)
-
From Expansion Tank.
Engine Coolant temperature sensor (G62) or Engine Temperature sensor (G27) (5)
-
With Engine Coolant Temperature Sensor (G2).