Jetta L4-1.9L DSL Turbo (AAZ) (1997)
Shifter M/T: All Technical Service Bulletins
M/T - Shift Lever Vibration/Knocking Noises
Condition
Shifter Lever, Vibrating/Knocking
Shifter lever vibrating/knocking in 1st, 2nd, 3rd or 4th gears.
34 07 01 Jan.16, 2007, 2002502, Supersedes Technical Bulletin Group 34 number 99-01 dated March 22, 1999 due to inclusion into ElsaWeb.
Technical Background
May be caused by transmission vibrations traveling through the selector shaft and shifter cables to the shifter lever.
Production Solution
Not Applicable.
Service
For vehicles with this condition perform the following:
NOTE: Transmission must remain in neutral throughout procedure.
-
Remove electrical connector from back-up light switch housing.
-
Remove nut -B- and balance weight -A- from gear selector cable attachment.
-
Remove gear selector cable from gear selector lever.
-
Disconnect gate selector cable from actuating arm/ relay lever -C- by lifting lug in direction of -arrow-.
-
Remove 2 bolts securing back-up light switch housing -D- and remove housing.
-
Remove self locking nut -7- and back--up light switch cam sleeve -6-.
-
Remove gear shift lever -12-.