Jetta L4-1.9L DSL Turbo (AHU) (1999)
-
Fasten CD changer assembly to vehicle floor (over carpet) at drilled locations using self tapping screws.
-
Optional method is to fasten empty CD changer bracket to vehicle floor first (without CD changer installed), then mount CD changer to bracket.
See Jetta, installation continued below.
Golf/jetta, installation continued.
-
Reinstall and secure all previously removed sill panel trim, seat cushions and luggage compartment carpet.
-
Vacuum luggage compartment (including underneath all carpet areas if necessary).
-
Reconnect Battery Ground (GND) strap,
-
Input radio security code and reset customer's preset stations.
-
Code radio for CD changer operation~ Repair Group 01
-
Refer to CD changer owner's guide and check proper operation of CD changer.
-
Ensure CD changer owner S guide is forwarded to customer.
Note: After reconnecting battery:
-
Activate vehicle vehicle equipment such as clock and power windows as per Repair Manual and/or Owner's Manual.
-
Activate readiness code.