Jetta L4-1.9L DSL Turbo (BEW) (2004)
-
Insert brake pads and brake pad retaining springs -arrows- into brake carrier.
-
Remove protective foil off outer brake pad backplate.
-
Secure brake caliper housing with new self-locking bolts.
-
Torque: 35 Nm ( 26 ft. lb ).
Note:
^
The repair kit includes four self-locking hex bolts which must be installed in all cases.
-
Press brake lever -2- in direction of arrow and attach parking brake cable. Install clip -1-.
-
Adjusting parking brake; Refer to Parking Brake Adjusting
-
Install wheels.
Refer to Steering and Suspension
Note:
^
After each brake pad change, firmly depress pedal several times with vehicle stationary, so the the brake pads are properly seared in their
normal operating position.
^
After changing brake pads check brake fluid level.