Jetta L4-1.9L DSL Turbo (BEW) (2004)
Brake Caliper: Service and Repair
Rear Brake Caliper Piston, Removing and Installing
Rear brake caliper piston, removing and installing
Special tools and equipment
^
3272 Piston resetting and removal tool
^
3409 Wedge
^
Bleeder bottle
Removing
^
Remove piston out of brake caliper housing by turning the knurled wheel counter - clockwise.
Notes:
^
Use special tool 3272/1 to help screw in.
^
If piston is difficult to move, use a 13 mm AF open end wrench on the flats ( arrow - A- ) provided for this purpose.