Jetta L4-1.9L DSL Turbo (BEW) (2004)
Test steps 3
Notes on test table
-
The socket designations of adapter VAG 1598/31 (for test step 2) are identical to the engine control module contact designations in wiring
diagram.
-
If the readings obtained deviate from the specifications, carry out repair measure in the right-hand part of the table.
-
If the measured figures deviate slightly from the specifications, clean sockets and plugs of the testers and adapter cables (with contact spray G 000
700 04) and repeat check. Before replacing components, check wiring and connections and also, particularly for specifications of less than 10
Ohms, repeat resistance check on the component.
Test Step 4
Test steps 4
Notes on test table
-
The socket designations of adapter VAG 1598/31 (for test step 2) are identical to the engine control module contact designations in wiring
diagram.
-
If the readings obtained deviate from the specifications, carry out repair measure in the right-hand part of the table.
-
If the measured figures deviate slightly from the specifications, clean sockets and plugs of the testers and adapter cables (with contact spray G 000
700 04) and repeat check. Before replacing components, check wiring and connections and also, particularly for specifications of less than 10
Ohms, repeat resistance check on the component.