Jetta L4-1.9L DSL Turbo (BEW) (2004)
1
-
Heater core
-
Always replace coolant after removal/replacement
-
Replacing:
-
Remove instrument panel.
-
Loosen instrument panel cross member.
-
Carefully pinch off both coolant hoses to heater core and disconnect hoses.
-
Seal off heater core to prevent coolant from running out
CAUTION!
-
The cooling system is pressurized when the engine is warm. Wear gloves and other protection and carefully release system pressure
if necessary, before performing repairs.
-
Partially remove heating and ventilation unit.
-
Press retainer clips and remove heater core.
2
-
Self tapping screw
-
Use if retainer clips break
3
-
Air distribution housing
4
-
Servo motor for - fresh/recirculating air door -V154-
5
-
Self tapping screw
6
-
Fresh air blower -V2-
7
-
Cover
8
-
Self tapping screw