Jetta L4-1.9L DSL Turbo (BEW) (2004)
Vehicles with 80-pin control module
-
Disconnect 4-pin connector from Engine Coolant Temperature (ECT) Sensor -G62- with Engine Coolant Temperature (ECT) Sensor -G2- (arrow).
-
Perform a resistance measurement at Engine Coolant Temperature (ECT) Sensor -G62- terminal 1 (Ground -GND-) and 3 (signal).
Vehicles with 121-pin control module
-
Disconnect connector at coolant temperature sensor.
-
Measure resistance between terminals 3 + 4 on sensor.
Vehicles with 154-pin control module