Jetta L4-1.9L DSL Turbo (BEW) (2004)
/Page-1506002.png)
-
Pull cover - 4 - for Passengers side airbag from instrument panel in opposite of direction of travel (cover is pushed flush into instrument panel).
-
Fold cover upward and unscrew three hex nuts - 3 - (4 Nm).
-
Remove hex bolts - 7 - (qty. 4, 2.5 Nm), loosen airbag unit - 1 - from supports - 5 -.
CAUTION: Electrostatic charges may result in involuntary deployment of airbag. Therefore, mechanic must be electrostatically
discharged before disconnecting ignition- and Ground (GND) wires. This is done e.g. by briefly grasping chassis or door striker.
-
Disconnect harness connector - 2 - and remove airbag unit - 1 - from instrument panel.
