Jetta L4-1.9L DSL Turbo (BEW) (2004)
-
Separate connector-arrow- and remove shift lock solenoid -N110- downward.
Installing
-
Join connector -arrow- to shift lock solenoid
-
Fit solenoid in locking pawl -arrow B-.
-
Clip shift lock solenoid -N110- into retainer -arrows A-.
-
Tighten cover with bonded seal to mounting bracket.
Note: Ensure the seal remains seated correctly.
-
Tighten nuts -arrows A- to 10 Nm.
-
Tighten both bolts -arrows B- to 25 Nm.
-
Install tunnel heat shields front and center.
-
Fit selector lever cable in bracket on front heat shield.
-
Reconnect exhaust system.
-
Reconnect Ground strap to battery.
-
Check selector mechanism.
-
Enter radio code.