Jetta L4-1.9L DSL Turbo (BEW) (2004)
/Page-1036001.png)
Transmission Mount: Adjustments
Engine and transmission mountings, aligning
Caution: The assembly must be supported with the support device 10-222A before loosening the bolts.
Engine assembly mounting
a = 14.0 mm
b = At least 10.0 mm
Both bolt heads - 1 - must be in flush with edge - c
Transmission assembly mounting
The edges - a - and - b - must be parallel with one another.
c = 18 ... 20 mm
Assembly mountings
Tightening torques
Assembly mounting, right:
