Jetta L4-1.9L DSL Turbo (BEW) (2004)
Quarter Window Glass: Service and Repair
Flush-Bonded Windows
Side Window (Wagon), Assembly Overview
Side Window (Wagon), Assembly Overview
1
-
Side window
-
Side window has no pre-coating
2
-
Seal with spacer (component of window)
3
-
PUR adhesive sealant
-
Bead cross section:
-
Width = 8 mm
-
Height = 12 mm (including residual material on window glass and window flange)
-
Minimum curing time
4
-
Securing pin
-
Two pieces
-
They secure side window between rear door and rear lid
-
When using old window, it is installed without securing pins
Undamaged Side Window, Removing
Undamaged Side Window, Removing
-
Remove luggage compartment trim in upper area.
-
Removing C- and D-pillar trim.
-
Insert plastic wedge between sealing lip and window flange.
-
Loosen seal from window flange all around and spray in cleaning solution D 009 401 04 (as a substitute for lubricant).